Make An Enquiry
- Home
- Shot & Grits
Shot & Grits
Aluminium Oxide
Mesh Size: 12 - 240
Size mm: 1.40 - 0.06
- For both dry and wet blasting at faster rate
- Recommended for both ferrous and non ferrous components
Chilled Iron Shot
Mesh Size: 8 - 52
Size mm: 2.00 - 0.30
- For cleaning, descaling, deburring, deflashing, shot peening on components of iron & steel.
Chilled Iron Grit
Mesh Size: 8 - 120
Size mm: 2.00 - 0.09
- For fast cleaning of heavy contamination.
Plastic Grit Acrylic
Mesh Size: 8 - 120
Size mm: 2.00 - 0.09
- For fast cleaning of heavy contamination.
Plastic Grit Urea
Mesh Size: 18 - 36
Size mm: 0.85 - 0.42
- For precise descaling, deflashing, deburring, shining of removal of old paint, varnish etc.
DF Grit
Mesh Size: 8 - 60
Size mm: 2.00 - 0.09
- For fast cleaning of heavy contamination.
Steel Grit
Mesh Size: 12 - 52
Size mm: 1.40 - 0.30
- For obtaining consistent surface roughness
Steel Shot
Mesh Size: 8 - 52
Size mm: 2.00 - 0.30
- For cleaning, descaling, deburring, deflashing, shot peening on components of iron & steel.
Steel Cut Wire
Mesh Size: 51 - 12
Size mm: 1.40 - 0.30
- For cleaning, descaling, deburring, deflashing, shot peening on components of iron & steel.
Nylon Shot
Mesh Size: 8 - 52
Size mm: 2.00 - 0.30
- For cleaning, descaling, deburring, deflashing, shot peening on components of iron & steel
Glass Beads
Mesh Size: 18 - 350
Size mm: 0.85 - 0.04
- For both dry and wet process to gently clean, descale deflash, deburr or shot peen at low intensity.
