Cabinet type abrasive blaster

Super Blast - SB

Works on INDUCTION - the SUCTION principle of abrasive delivery. The super blaster ensures continuous working and no interruption in the blasting cycle. Recommended for light and medium-sized components where the surface is to be cleaned or deburred or to impart with a fine matte finish. Useful for heat treatment shops, tools, die and mold makers, and shot peening of light metal components, etc. SB machines are incorporated with a reclaimer which ensures uniform cleaning and finishing each time and in every next operation. This is achieved by an automatic system of abrasive cleaning and separation built into the reclaimer. Dust and debris are separated, and only clean and sized abrasives are carried to the clast gun-ensuring a homogeneous finishing. Most cabinets of other make do not have the reclaimer as standard practice.

Pressure Blaster - PB

Works on the DIRECT PRESSURE principle of blasting, the pressure blaster produces high abrasive velocity resulting in cleaning the job at a faster rate. A pressure vessel directly bolted below the hopper of the cabinet has an automatic abrasive refilling arrangement. A tubular fabric bag-type dust collector with a generous filter area is attached to the cabinet as a standard feature for high efficiency of dust collection. A manual shaker is also provided for bag shaking PB is recommended for fast cleaning and for removal of heavy rust and corrosion using coarse abrasive. It is most suitable for etching the surface needed for rubber lining. FRP lining and metal spaying. Castings and forgings are cleaned speedily. Blast pressure can be controlled from 30 to 90 psi. Almost all types of coarse and medium size abrasives can be used depending on the application.

Wet Blaster - WB

Works on INDUCTION - the SUCTION principle of blasting. The most important point in wet blasting is its ability to use very fine abrasive - as fine as 5 microns. Fine abrasives are suspended in liquid, usually water, and then pumped to a nozzle as a slurry. At the nozzle, the slurry is introduced into the air - stream and propelled against the job. The glandless slurry pump is used to feed the slurry at positive pressure into the blast gun. The wetter parts of the pump are made of thermoset plastic material for corrosion resistance. WB machine is useful in the tool room to remove feather burrs and multi-tooth cutting tools, such as milling cutter holes, broaches, and taps, eliminating hours of hand honing time. It deburrs intersecting holes in precision parts that are inaccessible by any other method. The finest machined surface can be super-finished without damage to sharp edges and exact tolerances.