Home Contact
Portable Abrasive Blaster
Vaccum Blaster
Blast Cleaning & Finishing System
Pressure Blaster
Super Blaster
Wet Blaster
Blast Room Facility
Abrasive Blast Media
Internal Pipe Cleaning Tool
Accessories
Special Machines
Lubrication Systems
Thermal Spray Systems
Airless Spray Painting Machine
Painting Equipments
Cleaning Equipments
Vaccum Blaster :

KUBT-14

  • Specially designed model
  • Recommended for intermittent blasting
       & low productivity
  • DESCRIPTION OF MACHINE

    BLAST CLEANER P-14, with Edge and Angle Cleaning Attachment, 5 Mtr Air Hose with end Coupling and T.C. Nozzle 8mm

    TECHNICAL SPECIFICATIONS of MODEL KUBT-14
    Overall Dimentions 920 mm (L) X 350 mm (W) X 250 mm (H)
    Weight 4.2 Kg.
    Blast Cycle Continuous
    Compressed Air Requirement at 80 PSI 60 CFM
    Recommended Abrasive Size 40 Mesh & 80 Mesh (30 Mesh to 60 Mesh of Soft Abrasive)

    KU-15R

    It is a high performance blast machine for quick removal of millscale, rust, weld slag, old paint etc. It has it's own integral system of instant recovery of abrasive, dust and debris. No flying dust and abrasive to contaminate surrounding.
    How it works ?

    The system of KU-15R machine is shown here in diagrammatic cross-section; the arrows marked in red indicated abrasive flow from Abrasive Tank which is a pressure vessel, to Blast Gun and its return via vacuum hose to Reclaimer. The arrows marked in red & green represent recovery of debris, and dust from Blast Gun. Abrasive is pressure fed from Abrasive Tank (A) to Blast Gun (B) Blast Gun remains in close touch with surface to be cleaned. After cleaning the surface, abrasive, debris and dust is vacuum conveyed to Reclaimer (C) where good reusable abrasive is air-washed, sieved and then returned to Abrasive Tank (D) for reuse. Thus only clean air is discharged into atmosphere from (E) Dust Collector, Reverse air flow (vacuum) is created by Compressed Air Ejector or by Vacuum Pump (F). Blast and automatically transfers all dust, debris and used abrasive to Reclaimer via a vacuum hose, four castors facilitate movement along work surface. A nylon brush surrounds the gun body to prevent escape of abrasive and dust.

    KU-15RP

  • Portable mounted on 4 wheels
  • Blasting at high speed & velocity
  • Pneumatic recovery system
  • Abrasive tank capacity 28 liters
  • S. S. Cartridge dust collector
  • KU-15RE

  • Portable mounted on 4 wheels
  • Uniform cleaning and finishing
  • Vaccum pump recovery
  • Abrasive tank capacity 28 liters
  • S. S. cartridge dust collector
  • TECHNICAL SPECIFICATION
      Mode KU-15RP Model KU-15RE
      (With Pneumatic Recovery) (With Vacuum Pump Recovery)
    Overall Dimensions mm Appx. 800 x 1100 x 2200 H 800 x 2000 x 2200 H
    Abrasive Tank Capacity 28 Liters 28 Liters
    Blast Nozzle TC 6 mm 6 mm
    Blast Hose Dia & Length 19 mm x 7.5 M 19 mm x 7.5 M
    Recovery System Air Injector Vacuum Pump
    Reclaimer Type Cyclone & Vibrating Screen Cyclone & Vibrating Screen
    Dust Collector S.S. Cartridge S.S. Cartridge
    Compressed Air Requirement 5.10 M3/Min. at 6.33 Kg/sq.cm. 2.55M3/Min. at 6.33 Kg/sq.cm.
    Electrical Loading Nil 10 HP 415V 1 3P / 50Hz
    Mobile Close Circuit Vaccum Blasting Machine - Model KU-10
    Brief Working

    The blasting is accomplished manually by holding the gun against the work surface, which is fairly straight. The equipment being closed circuit, the spent abrasive is sucked due to vacuum created and cycled into pressure generator after passing through the reclaimer unit. Thus, the used abrasive and dust created is contained within the equipment, keeping the blasting operation dust free.

    Technical Specifications:

    Complete equipment/unit of Vacuum Blasting Machine with all accessories, all sub assemblies accommodated in two frame work provided with lifting lugs. The machine is suitable for blasting with chilled from grit G-02 to G-39 of BS-2451 and aluminium oxide 14/24-60/80. The machine is capable for reclamation (with vacuum pump of 15 HP) from 22.8 mtrs. Distance max. Single gun is provided with Supersonic tungsten Carbide for non ferrous abrasive. Proper sieving arrangement with manual rapping of dust collector's filter bags provided with heavy duty moisture separator to arrest line condensation from compressed air entering into the equipment to keep abrasive dry and blast surfaces uncontaminated to the extent possible.

    All the parts of systems are accommodated on two frame work with a lifting lug.

    The air consumption of nozle depends on size of nozzle used and pressure during machine operation.

    KU-10

  • Portable mounted on 4 wheels
  • Blasting at high speed & velocity
  • Vaccum pump recovery system
  • Abrasive tank capacity 112 liters
  • S. S. Cartridge dust collector
  • Single Gun outlet
  • TECHNICAL SPECIFICATION Model KU-10
    Overall Dimensions mm Appx. 1600(L) X 2500(W) X 3600(H)
    Abrasive Tank Capacity 112 Liters
    Blast Nozzle TC 9.5 mm
    Blast Hose Dia & Length 25 mm x 15 M
    Recovery System Vacuum Pump
    Reclaimer Type Cyclone & Vibrating Screen
    dust Collector Cartridge Type
    Compressed Air Requirement 7.5 M3/Min at 6.33 Kg/sq.cm
    Electrical Loading 15 HP 415V / 3P / 50 Hz
    Mobile Close Circuit Vaccum Blasting Machine - Model KU-15C
    Mobile Circuit Vacuum Blasting Machine most suitable for INSITU Blast cleaning operations featured with its own integral system of instant recovery and recycling of usable grit as well as built in dust collection system for safe and dust free operation.

    KU-15C

  • Portable mounted on 4 wheels
  • Uniform cleaning and finishing
  • Vaccum pump recovery
  • Two Gun outlet
  • TECHNICAL SPECIFICATION Model KV-15C
    Overall Dimensions mm Appx.  
    (a) Reclaimer 2000 mm(W) x 2000 mm(D) 3600 mm(H)
    (b) Dust Collector 2000 mm(W) x 1600(D) 3200 mm(H)
    Abrasive Tank Capacity  
    (a) Upper Tank 30 Liter
    (b) Lower Tank 60 Liter
    Blast Nozzle TC 9.5 mm x 2 Nos.
    Blat hose Dia & Length 25 mm x 15 Mtr. 2 Nos.
    Recovery System Vacuum Pump
    Reclaimer Type Cyclone & Vibrating Screen
    Dust Collector Cartridge Type
    Compressed Air Requirement 15 M3/Min at 6.33 Kg./Sq.cm.
    Electrical Loading 30 HP 415 V / 3P / 50 Hz