Home Contact
Portable Abrasive Blaster
Vaccum Blaster
Blast Cleaning & Finishing System
Pressure Blaster
Super Blaster
Wet Blaster
Blast Room Facility
Abrasive Blast Media
Internal Pipe Cleaning Tool
Accessories
Special Machines
Lubrication Systems
Thermal Spray Systems
Airless Spray Painting Machine
Painting Equipments
Cleaning Equipments
Lubrication Systems :
MOTORISED LUBRICATION UNIT

  • Pump : Gear (geroter type) - motorised plunger type-manual/pneumatic.
  • Operating Pressure : upto 30 kg/cm2.
  • Tank : Capacity upto 75 Ltrs.
  • Metering of oil through cartridges from 0.01 cc to 1.6 per cycle.
  • Suitable for mineral, synthetic oil & semi fluid grease.
  • Available with automatic control.
  • Can bne supplied with other accessories like fittings, tubings & hoses.
  • APPLICATION

  • Metal Cutting Machines
  • Metal Forming Machines
  • Textile Machines
  • Injection / Blow Moulding Machines
  • Pharmecautical Machines
  • Die Casting Machines
  • Packing Machines
  • Printing Machines
  • SINGLE LINE LUBRICATION SYSTEM
  • Pump : Plunger type motorised / manual / pneumatic.
  • Pressure Rating upto 30 kg/cm2 (450 PSI).
  • Delivery volume upto 60 grams / minute.
  • Reservoir capacity upto 250 litres.
  • Metering with the help of progressive type of metering blocks.
  • Suitable for grease upto NLGI-II/Oil.
  • Can be supplied with automatic control panel, transfer pump and accessories (in line filter, flow sensor, fittings and tubings).
  • APPLICATION

  • Calendering Machines
  • Earth Moving Equipments
  • Vehicle Lubrication
  • Die Casting Machines
  • Tyre Making Machines
  • Cement Plants
  • Sugar Machinery
  • DUAL LINE GREASE LUBRICATION SYSTEM
  • Pump : Plunger type motorised.
  • Pressure upto 40 kg/cm2 (600 PSI).
  • Delivery volumes upto 250 grams / minute.
  • Available in both versions i.e. close loop / open loop.
  • Reservoir upto 250 litres.
  • Dose Feeders with discharge varying from 0 to 10 grams/cycle.
  • Suitable for grease upto NLGI-III.
  • Can be supplied with all accessories, transfer pump, automatic control panel, end relays, grease level sensor, piping and fittings.
  • APPLICATION

  • Steel Plants
  • Cement Plants
  • Turbine Generators
  • Earth Moving Equipments
  • Furnaces
  • Coal & Mineral Machinery
  • OIL CIRCULATORY SYSTEM
  • Design : according to DIN/API/ASME standards.
  • Pump : gear / screw pump discharge upto 1,000 Ltrs./minute-motorised.
  • Operating Pressures : upto 100 bar.
  • Tank Capacity upto 10,000 litres.
  • Cooler : shell and tube type/plate type with water as cooling media.
  • Filter : Single or doule type with minimum 10 micron rating.
  • Can be supplied with accessories like differential pressure switch, temperature monitoring, oil level monitoring, control panel for automation, valves, jack pumps, accumulators, pipings and fittings.
  • APPLICATION

  • Paper Industries
  • Steel Plants
  • Sugar Plants
  • Cement Plants
  • Turbine Generators
  • Rubber Mixing Machines
  • High Power Electric Drives
  • MULTI LINE LUBRICATION SYSTEM
  • Pump : Plunger type - motorised.
  • Delivery volume : 0.1cc to 1 gram/stroke/per outlet.
  • Operating pressure : upto 300 bar.
  • Maximum number of outlets : 36.
  • Tank : capacity upto 250 litres.
  • Suitable for grease upto NLGI-III/Oil.
  • Can be supplied with automatic control and accessories like check valve, in line filters, tubings, fittings, grease level sensor.
  • APPLICATION

  • Forging Hammers
  • Presses
  • Petrol-chemical plants
  • Sugar Plants
  • Steel Plants
  • Cement Plants
  • Earth Moving Equipments
  • Crushers
  • MIST LUBRICATIONS SYSTEM
  • Pump : Pnematically operated.
  • Operating Pressure : 4-7 kg/cm2 for air.
  • Reservoir capacity : upto 75 Ltrs.
  • Adjustment of spray pattern possible.
  • Available in both versions : continuous type and intermittent type.
  • Can be supplied with automatic control, level sensor, spray nozzle, pipings, fittings etc.
  • Suitable for oil as well as grease.
  • APPLICATION

  • Cement Plants - Girth Gear
  • Steel Plants
  • Machine Tool Spindles
  • Conveyors
  • Chains
  • Railway Wheel Flanges
  • Moulding Dies
  • SINGLE SHOT GREASE SYSTEM
  • Pump : Pneumtic
  • Operating pressure - 75 kg/cm2.
  • Metering quantity 0.16-1.6 gms/cycle.
  • Suitable for oil or grease
  • Suitable for high temperature zone.
  • Available with automatic control.
  • Also suitable to form mist grease.
  • APPLICATION

  • Presses and hammers
  • Glass making machines
  • Bottle manufacturing machines
  • Tyre processing machines
  • Furnaces
  • Hot rollings mills
  • High temperature forgings
  • VEHICLE LUBRICATION
  • Single line grease pump 12V/24V.
  • Pneumatic Pump.
  • Metering blocks 3 to 16 points upto 150 bar.
  • Double line grease pump for 300 bar pressure for heavy duty earth moving vehicles.
  • Double line blocks.
  • Reversible valve, end pressure relay for double line system.
  • Automatic control.
  • APPLICATION

  • Commercial Vehicles like Trucks, Buses.
  • Dumpers, Shovels Excavators.
  • Drag liners.
  • Construction equipments.
  • Tractors
  • Road building machine
  • Manual system for tractor
  • ACCESSORIES
    Basic lubrication accessories are as below :
  • Pump - upto 100 LPM.
  • Float switches - "Read" or "Mercury" type.
  • Pressure switches upto 400 kgs/cm2
  • In line / suction filter.
  • Pressure gauges upto 400 kgs/cm2.
  • Other hydraulic items like valves, Oil gauge Breather-cum filter etc.
  • Metering blocks for single line
  • Double line blocks
  • Single line metering cartridges for oil.
  • Single line injector for grease.
  • Lubrication controls for the items during fillings.
  • APPLICATION

  • Cenlub lubrication units for oil and grease.
  • MOTOR PUMP ASSEMBLY
  • Available in wide range from 0.5 LPM to 25 LPM.
  • Motor is attached with the Pump.
  • Power of the motor is .09 KW to 2.2 KW.
  • Flange mounted totally enclosed 415V.
  • Additional items like Relief Valve, Suction Strainer can be supplied on request.
  • Operational Pressure Maximum 5 kg/cm2.
  • Normally it is a foot mounted design.
  • Flange mounted design can also be supplied.
  • Availeble with Automatic Control.
  • APPLICATION

  • Lubrication for Machine Tools and general purpose Machine.
  • Lubrication for Plants.
  • Burning fuel application.
  • Filtration of oil.
  • Transfer of oil.
  • PNEUMATIC TRANSFER PUMP
  • It is pneumatically operated.
  • Pneumatic Pressure is : 4-6 kg/cm2.
  • Discharge : 400 gms/min for grease 10 lpm for oil.
  • Transfer Pressure : 100 kg/cm2.
  • Both version available i.e. for Oil and Grease.
  • Suitable for barrel 200 kg and 20 kg.
  • Available with follower plate for Grease application.
  • Suitable for Grease upto NLG-3
  • Can be supplied with automatic control.
  • APPLICATION

  • Transfer of oil/grease from Barrel.
  • Can be used for lubrication with the help of control for any aplant application.
  • Can be used for making Mist (Lubrication) as well as for Single Shot Progressive Lubrication, for Oil/Grease in any Plant application.
  • With the help fo digital display at gun for oil, metered dispensing is possible.
  • GREASE DISPENSING SYSTEM
  • Reservoir capacity 20 kg/200kg.
  • Pressure of Air .4kg/cm2.
  • Pressure fo Grease 70 kg/cm2.
  • Metering by manual control.
  • Grease can be injected into a lubrication point directly by gun.
  • Grease can be fed into grease nipples with the help of grease gun.
  • Trolley mounting, hence mobile.
  • Supplied with FLR Unit.
  • APPLICATION

  • Suitable for Machine Tools, Press Tools.
  • Suitable for Plants like : Sugar, Cement, Steel.
  • Suitable for Machine like Rubber, Tyre, Injection Moulding, Marble Textiles, Die Casting.
  • Suitable for Earth Moving Euipments.
  • Suitable for Vahicle Lubrication.
  • CENRALISED LUBRICATION SYSTEM (SINGLE SHOT TYPE)
    PUMP : Hand Pump with reservoir
    MODEL H-250-4 A

  • This pump has itw own reservoir.
  • It is piston type, where piston is actuated by a cam, integral with the handle of the pump.
  • On operating the handle, pump discharges oil.
  • As soon as the pulling force on the handle is released, piston returns back by spring force and the pressure in the lubrication line is reduced to 1kg/sq. cm.
  • There is an in-built check valve and pressure reducing system incorporated in the pump.
  • Pump is equipped with relief valve, which safeguards it from overloading.
  • Pump is fitted with an oil window to cross-check the level of oil in the pump and to refill the reservoir from the top openin, once the oil level is nearing the minimum.
  • Pump is equipped with a suction strainer at the inlet and a drain plug at the bottom of the reservoir.
  • Suitable holes are provided for vertical mounting of the pump.
  • Pump outlet is suitable for 6 mm dia tube.
  • Pressure : 15 kg/cm2
    Discharge : 4cc per stroke
    Reservoir capacity : 250 cc
    Material of reservoir : Acrylic
    Suitable for oil with viscosity 32 - 320 cSt/400 C.
    Best suited for medium size machines.
    MODEL H-600-6

  • This pump has itw own reservoir.
  • It is piston type, where piston is actuated by a cam, integral with the handle of the pump.
  • On operating the handle, pump discharges oil.
  • As soon as the pulling force on the handle is released, piston returns back by spring force and the pressure in the lubrication line is reduced to 1kg/sq. cm.
  • There is an in-built check valve and pressure reducing system incorporated in the pump.
  • Pump is equipped with relief valve, which safeguards it from overloading.
  • Pump is fitted with an oil window to cross-check the level of oil in the pump and to refill the reservoir from the top openin, once the oil level is nearing the minimum.
  • Pump is equipped with a suction strainer at the inlet and a drain plug at the bottom of the reservoir.
  • Suitable holes are provided for vertical mounting of the pump.
  • Pressure : 18 kg/cm2
    Discharge : 6cc per stroke
    Reservoir capacity : 600 cc
    Material of reservoir : Aluminium casting
    Suitable for oil with viscosity 32 - 460 cSt/400 C.
    Best suited for medium size machines.
    MODEL ALU-03

  • This is a mini bydraulic power pack fitted with a motor and rotary positive displacement pump.
  • The unit is designed for intermittent run only and is best suited for Single Shot Lubrication.
  • Unit is fitted with a suitable pressure switch, float switch and oil window for checking oil level.
  • During ON cycle, the electrically driven pump discharges the oil with high pressure, adjustable between 15-18 bars, with the help of an in-built relief valve, for safeguarding the system from over-loading.
  • During OFF cycle the pressure in the lubrication line is reduced to 1 kg/sq.cm.
  • The system is also provided with a bleed valve near the outlet port to automatically bleed air if entrained in system.
  • For vertical mounting of the unit, four holes are provided at the back of the system.
  • There is an in-built check valve and pressure reducing system inforporated in the pump.
  • Outlet port is suitable for 6mm OD tube.
  • Discharge of pump : 1 LPM.
    Reservoir capacity : 3 ltrs.
    Motor : 0.09KW, 1500 rmp, 3 phase, 415 V.
    Relief valve : Pre-set at 15-18 kg/sq.cm.
    Pressure switch : 42 V (Max), 0.2 A (Max), NC contact (Oil filled)
    Electronic controller : Optional
    Suitable oil : Between 32 to viscosity 460 cSt/400 C.
    Best suited for medium size machine.
    METERING CARTRIDGES

  • The element is a valve which ejects out metered amount of oil to lubrication point instantaneously.
  • It is a sort of mini cylinder with a special check valve where stroke of piston determines the dosage of oil.
  • The complete design of metering cartridge does not allow it to leak at low as well as at high pressure of oil.
  • Operating oil pressure for metering cartridges is 10-30 kg/cm2.
  • Outlet ports of metering cartridges are suitable for 4mm OD tube.
  • For meterint cartridges, next cycle of ejection of oil is only possible when pressure of oil in lubrication line comes doen towards zero.
  •  

    The various models are :

    D1 *Dosage :
    With dosage 0.01/0.03/0.05/0.10/0.16 cc per cycle with +/-15% accuracy of dosage.

    D X 1 * Dosage :
    Above items with honed bore, silicon rubber with +/- 10% accuracy of dosage.

    D2 Dosage :
    With dosage 0.25/0.40 cc per sycle with +/- 10% accuraty of dosage.

    D X 2 * Dosage :
    Above items with honed bore, solicon rubber with +/- 10% accuracy of dosage.

    D3 * Dosage :
    With dosage 1.0/1.60 cc per cycle with +/- 15% accuracy of dosage.

    D x 3 * Dosage :
    Above items with honed bore, silicon rubber with +/- 10% accuracy of dosage.

    MANIFOLDS

  • Manifolds are nothing but steel blocks for mounting metering cartridges. These have two ports and few side outlets. On side outlets, metering cartridges are screwed directly while in line ports are meant for joining next manifold in line with 6 mm OD tube. For fixing manifold on machine wall, there are mounting holes suitable for M5 screws.
  • For D1 and D2 models of metering cartridges, there are manifolds of 4 sizes namely, 1 way (Model M1). 2 way (Model M2), 3 way (Model M3) and 5 way (Model M5).
    The nomenclature states the number of cartridges, a manifold can maximum accommodate. The manifolds have M8 x 1 tapping for fitment of metering cartridges. The unused side outlets can be blocked with M8 x 1 plugs.
  • For D3 model of metering cartridges, there are manifolds of 2 sizes namely 1 way (Model M1A), 3 way (Model M3A).
    The nomenclature states the number of cartridges, a manifold can maximum accommodate. The manifolds have M10x1 trapping for fitment of metering cartridges. The unused side outlet can be blocked with M10x1 plugs.
  • Model L No of mounting holes W Thickness Port size-P Center distance C
    M1-1 way 35 for model D1 One 18 15 M8x1 N.A.
    M2-1 way 55 & D2 of One 18 15 M8x1 20
    M3-1 way 75 metering Two 18 15 M8x1 20
    M5-1 way 115 Cartirdge Two 18 15 M8x1 20
    M1A-1 way 40 For model D3 One 22 22 M10x1 N.A.
    M3A-3 way 90 of metering cartridge. Two 22 22 M10x1 25